Complete exhaust system. Ott ^{pipe in front. Random Technology SuperStainless high flow cats, P/N 702500. Random Technology does not have a picture of the 702500 cat on their web site, but their 8100 series universal cat is the same size. Picture of their 8100 cat. The dual 2.5" rear exhaust uses Bullet Performance 4"x8"x16" mufflers, P/N 212161.} Note how closely the mufflers fit at the inside of the heat shields. About 1 inch must be cut off the front pipe stub of the mufflers so they will fit in the length available. If you use different mufflers, be sure they will fit.

Here is another option with headers on a 6.5L motor. The exhaust is 3" diameter stainless. After the header collectors, are two 4" diameter 16" long mufflers followed by an X section crossover. The 4" diameter mufflers in front of the crossover could be exchanged for cats. The rear mufflers are Borla brand with 3" dia. side inlet and outlet. The tailpipes exit straight out the rear. Insulation is used under the fuel tank to reduce heat absorption.